How to Frame Pictures : What is a Synthetic Frame Mold?

How to Frame Pictures : What is a Synthetic Frame Mold?


My name is Amitavh Bhattacherji and I am speaking
on behalf of Expert Village. And I represent my company Abstract Frames and Supplies Private
Limited. This is basically the frame. It comes in nine and one half and ten feet long sticks
and it is synthetic mold. First we start by measuring the picture and then we cut the
longer side of the picture first because if we make a mistake we can use the longer side
for the shorter side. So after we have measured all four sides of the picture, we first cut
the stick into the long side with the cutting machine. The cutting machine is basically
a foot operated or hand operated cutting machine that cuts a 45 degree angle in the frame.
As you will notice when the two 45 degrees add from two sides it makes a corner. Once
we have put the long side and the short side together we clamp it. It is recommended that
you use a synthetic glue to the two corners. Then clamp the two corners. After we have
clamped the two corners, we bring the two corners under a wedge machine. It is basically
it is a stapler like we staple paper. You can staple the frame from underneath and the
wedges bring the two corners together. And the two corners then constitute a part of
half of the frame. Similarly, we do the next two corners and finally we do the remaining
two corners so you have a four-sided frame. Thank you.

Dereck Turner

27 thoughts on “How to Frame Pictures : What is a Synthetic Frame Mold?

  1. Dennis Harold says:

    so i made it too . just by using woodprix scripts:)

  2. Romelia Polly says:

    I made it by myself. I used Woodprix woodworking plans for that.

  3. Rajesh Deshmukh says:

    Bhai g ye Jo machine h usme kharcha kitna h plz Bhai g bataiye
    my contact no, 9753200660

  4. Romaine Athey says:

    Go to Woodprix page if you want to learn how to build it yourself.

  5. Romelia Polly says:

    You can use woodprix, it has the best handbooks and ready instructions. You can learn much from them and make it yourself.

  6. Studio Classic Image says:

    contact number sir!

  7. mohammed irfan says:

    mujhe apni painting lagane ke liye khali frame chahiye plz send details my what apps no.09214960244

  8. nag digitals says:

    contact number sir!

  9. Romelia Polly says:

    I bought instruction from woodprix and I build it very very cheap.

  10. Pratap Chandra says:

    Mashin kanha milega sir ji our ret kitana hai mujhe bhi kharidna hai plz call mi 9993266991

  11. Jaysingrao Ade says:

    muze ye khardna hai
    ap muze 9423356218 contact kro

  12. Lokesh Saini says:

    good

  13. Bipin Kumar says:

    Mujhe chaye phone kare sir 7759070428 please

  14. Gurdeep Heer says:

    Please send us ur phone no

  15. Sai S says:

    hi i am from pondicherry india, i need the frame for my paintings so please tell me where should i get the raw material of frame.

  16. Md. Manik says:

    plz. send your phone number.

  17. Raju Sahoo says:

    Sir plz phone no send
    My no – 9658649752
    Plz contact me

  18. Atef Yhia says:

    God man amitap

  19. jaladhar mandal says:

    frem milega

  20. Abdul Hasnat says:

    I need your contact no for wooden frame. And your address for business purposes.

  21. A K says:

    Where from I get machines which you mentioned

  22. Kapil Bareja says:

    Plz coll my number 9899323306 kapil

  23. Sabarinath P S says:

    Can we drill a hole on them for providing screws?

  24. Mohd Aslam says:

    अपनाफोननम्बरदेदोमेरेनम्बरपेफोन करो09953472415

  25. Paltan Yadav says:

    Kolkata me aapka holshel kha hi

  26. Ravi Kumar says:

    material kha milega sir best
    Quality Ka

  27. Deepak Kumar says:

    How Mach, this machine

Leave a Reply

Your email address will not be published. Required fields are marked *