Flying Monkey Scroll Saw Art & Round Frame

Flying Monkey Scroll Saw Art & Round Frame


Hello Internet. I’m Matt Haas, this is Awesome
Wood Things. I made flying monkey artwork on my scroll saw… put it in a completely
round frame made out of plywood. I really like it. I bought myself The Wizard of
Haas dot com domain name. I’ll do some YouTube consulting with that. Want to see
how I made this? I’ll show you how… check it out. I used my lathe to clean up the end and
then put a groove in it which you can see here. I put the largest blade I had
on my scroll saw to get through the three quarter inch material. Feel free to
yell at me in the comments for not putting any video footage of my lathe in
this video. If you want lathe video footage, let me know in the comments.
This groove is important because it will let the flush trim bit do its job and remove
that extra material. This worked so well. I’m being very
careful. This is a dangerous operation so keep a hold of the workpiece and keep
track of where your fingers are. Then I put this monster rabbeting bit on and oh
my goodness this bit is a beast. It destroyed that wood did an awesome job too. Lots of sawdust. Love it. Spray lacquer wins the day with this one. Now for the assembly. Everything is just
tension. Although I did break out my pin nailer just to make sure nothing
goes anywhere… and I finally remembered what this tool is called: It’s a pin
nailer! I have an affiliate link in the description if you want one. Here’s the
final piece in emerald green and yellow brick road yellow. Thanks, Internet.

Dereck Turner

16 thoughts on “Flying Monkey Scroll Saw Art & Round Frame

  1. StudioGeek32 says:

    That is So Cool!

  2. Jeff Robinson says:

    Yes, more beginner lathe videos would be awesome!

  3. Jeff Robinson says:

    What are you using for the green and yellow?

  4. Dave Gatton says:

    Flying monkeys! Pure awesomeness! Great job Matt.

  5. Şahane bilgiler says:

    Hello there. good idea. Flying Monkey. Nice job with a hair saw. congratulations. Thanks for sharing….

  6. Osprey Momma says:

    👍🤚Matt excellent looks fly ❤️it take care 💕

  7. The Mad Maker says:

    I’ll watch this video my pretty! And I’ll like the video too! 🧙🏻‍♀️awesome as always!

  8. DesertBum WoodWork'n says:

    That's cool Matt, came out Awesome, don't worry about not showing your lathe work. and my uncle just gave me a pin nailer

  9. paulsmessyworkshop says:

    Nice project Matt. When I first saw the post with your lathe I thought for sure you were making a bowl..LOL. Your project came out great.

  10. Jon Wills says:

    Looks awesome

  11. Harneal Media says:

    Cool Matt

  12. Rag Tie says:

    Nice work on this Matt

  13. Maple Tree Studios says:

    Love it Matt.

  14. Niantic River Woodcrafting with Chris Neilan says:

    Nice job!

  15. Make It Mazzeo says:

    Great idea making the groove with the lathe and then the flush trim I wouldn’t have Thought of that!

  16. Mama Bear's She Shed Tracy Keaton says:

    Flying monkeys all about! Oh my word! Way to go Matt! This is pretty cool and the colors really came to the rescue.

Leave a Reply

Your email address will not be published. Required fields are marked *